BBDINO Silicone Mould Making Kit, 30A Liquid Platinum Silicone Rubber 4550g, 1A:1B by Volume, Ideal for Silicone Mould Casting of Resins, Soap, Concrete, Plaster, Wax etc.

Working with this high-quality silicone has been a truly enjoyable experience. The material is remarkably easy to mix, boasting excellent strength and flexibility. These attributes promise a final result that is not only durable, but also capable of withstanding repeated use as a mould.One of the most critical steps in the silicone pouring process is degassing. By carefully stirring the mixture and being mindful to avoid introducing excessive air bubbles, you can achieve a flawless finish for your mould. Before I poured the silicone, I took additional precautions to eliminate as many bubbles as possible. I applied rubbing alcohol, which effectively breaks the surface tension of the bubbles, causing them to burst more readily. Complementing this, I used a vibration pad to help dislodge any air that might be trapped within the mixture. Together, these techniques significantly reduced the amount of air that remained in the mixture, allowing me to create a solid, high-quality mould that I anticipate will serve me well for quite some time.Due to some pressing deadlines associated with my project, I also needed to expedite the curing process. I employed a few strategies to speed things along, ensuring that I could continue my work without excessive delays. The combination of high-quality material and thoughtful techniques resulted in a mould that I am confident will meet my needs.

The media could not be loaded. This silicone is so easy to use, mix by quantity on a 1:1 and stir for about 2 minutes and it's ready to pour.After curing it's obviously tough and durable but flexible enough to work with.I'd suggest making a cut mold or a thin 2 part as it is very dense at the thicker parts.The level of detail it picks up is very impressive.Cheaper than a lot of other silicone products too.

This is a fantastic product that does exactly what it claims to do. A 10 x 3 inch mold filled to the brim took around 3-4 hours to set perfectly with absolutely no bubbles. The hardness is great, soft and great to work with. Very impressed! I will definitely be using it again.

This is completely brilliant. It sets overnight to a durable, flexible, resilient silicone mold that can be used many times. I was very critical of the soft silicone mold kit made by this company, which didn’t set properly, but I can guarantee you will be 100% delighted with this kit. It is expensive, but worth every penny.

It worked very well, and as described.You do need to be very alert to contact with certain things that can inhibit the curing. I found that something within the cut surfaces of MDF caused inhibition, perhaps from the binding resin within the MDF.

The BBDINO Silicone Mould Making Kit in Sapphire Blue simplifies the mold-making process.The kit has a 1:1 volume ratio for mixing, making the base material is then very straightforward.As it is self-degassing, it better captures fine details. ~The kit is suitable for crafting both 2-piece and 1-piece silicone moulds, and due to the inherent flexibility of the mixed silicon, the moulds can be reused multiple times.Using the kit was straightforward, although there were some basic items I needed to hand, such as a tray in which to create the mould.In conclusion, it is a relatively simple means of creating silicon moulds.

Great

Missing items. No mould or cup.