🔥 Seal the heat, own the fix — the ultimate high-temp epoxy stick!
J-B Weld 8297 HighHeat Epoxy Putty Stick is a 2oz machine gray adhesive designed to withstand continuous heat up to 450°F and intermittent heat spikes up to 500°F. It offers 3 times the strength of conventional epoxy putties at high temperatures, making it perfect for automotive and industrial repairs involving exhaust manifolds, mufflers, engine blocks, and more. Easy to use with a knead-and-apply formula, this American-made product ensures a reliable, heat-resistant bond for demanding applications.
| Manufacturer | JB WELD LTD |
| Brand | J-B Weld |
| Model | JB8297 |
| Product Dimensions | 3 x 3 x 10.5 cm; 70 g |
| Item model number | 8297 |
| Exterior | Painted |
| Manufacturer part number | 8297 |
| Special Features | Heat Resistant, Strong |
| Item Weight | 70 g |
| Viscosity | Medio-Alto |
J**S
Performs as stated
Excellent product
H**N
Easy repair for exhaust and bracket
Had to purchase this as during an inspection under my car I found the exhaust mounting bracket had broken away from the exhaust.So after making up a ball of this I applied it to the arm and exhaust, the adhesion was very good with no messiness. The bracket held to the exhaust and I left the vehicle to sit for a day and then took it for a long drive and checked the exhaust which was still held in place so this has good strength and durability. Hopefully this will last!
K**Y
Excellent stuff. Long term review.
Had a small hole in our hall radiator. I was skeptical to tell the truth. Hallelujah, it actually worked. Sealed the hole, no problem. Over a year now since I did the repair. Still no leak. Once the putty sets, it goes rock hard. Handy stuff to have in the tool box.Highly recommended..
A**R
Works well
Worked well in cylinder head
M**Y
Metal wield
All good on time sealed the exhaust
S**N
Not as good as it should be
Not as high heat as it says
K**K
Good stuff
Used it to tidy up my welding on my exhaust it sets rock hard even without heat, easier to mix without gloves as long as you use plenty soap & water will use again if i get a stripped thread as it can be drilled & tapped. Delivery quick 48 hours.
E**Y
Repaired middle silencer along seam
I used this on a middle silencer along the original weld seam which had split slightly and was causing it to blow.Firstly, I suggest you use a wire brush to remove any loose metal or rust. I also applied Hammerite Kurust rust converter to the area to prevent any rusting occurring behind the repair. This was left to fully dry.This product was kneaded together and then pressed into, on top of, and around the split, and then extended the entire length of the seam. This took an hour, but only because I wanted to make sure the putty was sealed up against the metal as best as possible.It was left to cure over night, and driven the next day.No more blowing that I could feel/hear.3 weeks later, the car passed MOT.I would say it's worth it before purchasing an entire new exhaust replacement.Finally, there is a slight smell which has faded over time. Others reporting of a strong smell must have it on a hotter component. On the middle or rear silencer, I would say there's very little smell after 3 weeks.
Trustpilot
3 days ago
3 weeks ago
