DIY Soldering Project Game Kit Retro Classic Electronic Soldering Kit with 5 Retro Classic Games and Acrylic Case, Idea for STEM High School Family Education Friends by Etoput

Really fun to build with my 10 year old. Just enough soldering to make it fun. Not too complicated.

User Glaucon already posted a fantastic review, I want mine to complement that one. Please read that first and then come here for the things I'd like to add. (pause)The kit has a full-color instruction sheet with pictures, and is laid out in a way that if you follow the numbers for each step it works rather well. The steps are laid out in an odd fashion but again, follow the numbers. The PDF instructions mentioned in the product description do provide a few other CRITICAL pictures if you haven't done many kits like this or aren't familiar with the parts. Please look in the QA part of this item to see the link to it in dropbox. You want to look at the file called "User Manual new.pdf"The battery box has wires that are very long, but I chose to leave them that length. Iwrapped them once around the box before using the double-stick tape to attach the box to the back of the case. (Be sure to route the wires through the little U-shaped hole on the wall of the case where the USB connector hole is.)DIY Improvements you could do:- The bare LED matrix and number display are a bit bright to my eyes, even if you lower the brightness on the system's menu. I'd suggest either finding some "window tint film" at a car parts store or getting a transparent-color plastic notebook organizer sheet and cutting it to match the top plexaglass part of the case, to make the lights less hard on your eyes. If the manufacturer reads this, if you can order this with a darker or "smoked" plastic, like what sunglasses use, I think it would be a nice improvement.- The Micro USB socket is a bit dated. If you can find a socket that is Mini USB or USB-C and replace the included USB socket with that, you'll have an easier time finding a replacement cable if you lose yours.- I have seen at least one 3d printed case for this on a popular free 3d printing site, if you want to make your own case that does not expose the battery box. It can be found if you search with the words DIY, kit, and brick.

This was a fun little kit. I wanted to learn to solder and after completing this project I have learned the basics. The games are actually fun to play too. There wasn't a lot of instruction included so I watched some YouTube videos which were very instructive. The little booklet works to walk you through each step, so it's good as long as you supplement with YouTube for learning soldering techniques. What this kit doesn't teach you is anything about the components it is really just soldering practice. I will get another kit that will teach me about resistors, capacitors, etc. next. One word of caution, I cracked the acrylic case by over tightening the last screw -- don't do that.

I love this thing! I have a lot of experience with soldering already so this was a breeze, but the instructions are very good and well-illustrated so an inexperienced person should have no trouble figuring it out. The solder points are all nicely spaced and should be plenty forgiving, with the sole exception of maybe the USB port; the instructions maybe should make mention that this part is optional because it's only used for powering the device (I'm not sure yet, but I don't think it's easily reprogrammable - though I have reasons to believe it might be and I'll update this with whatever I find), and if you just plan on using the supplied 3xAAA battery holder to power it, you won't need the USB socket. I opted to use a LiPo battery I'd had on hand (I don't remember what I pulled it from, but I'm including a picture; it's a weirdly-sized one that just happened to fit in the front between the buttons and the large IC.In the future, I think I'm going to buy some longer stand-offs and stick 4x 18650 batteries on the back of the board along with a USB power bank circuit (available cheap on Amazon!), so what I'll end up with will be a USB power bank that also plays games.And the games are actually fun! The description really should make mention that the highest-achieved score in each game is retained in apparently non-volatile memory (they persist even after powering off and replacing batteries), while really lends well to challenging replayability.Hey, TAG teachers! Buy these for your kids! It does not disappoint.

fun kit for tinkering

The media could not be loaded. This was a fun and easy build, I bought to test my soldering skills a circuit board because it had been years. I usually do cables so this was cheap. What you end up with is insanely fun ! Make sure you pay attention to the instructions which are great btw. I got ahead of myself and accidentally soldered the usb port on the wrong side, but I was able to fix it. It took me about an hour to completeSeriously a great project

Great first project. Super easy solder points (wires for the battery pack are probably the trickiest). The instructions must have been revised since older comments because they were very clear and had bright quality pictures showing correct placements and correct soldering points. Took about 60-75 minutes start to end. The games are fun enough plus the clear case shows off your soldering, so it’ll be a good conversation piece to show your friends what you’ve been up to.The only downside is that I wish it had a bit more soldering to do just to get more practice in

I am mentoring a young guy and he is interestedin electronics. It was his suggestion we buy theseand it was an instant hit! With plenty of easy toreach solder points we was soldering like a proby the end of the time. And unlike other solderingpractice boards it has a real function and was astandout hit with all the young kids normallyaddicted to their tablets. I cannot recommend thishighly enough.